- Whole-home coverage - An eero 3-pack is a whole-home WiFi system that replaces your router and covers up to 5,000 sq. ft.
- Works with Alexa - With eero and an Alexa device (not included) you can easily manage WiFi access for devices and individuals in the home, taking focus away from screens and back to what’s important.
- Works with your internet service provider - Eero connects to your modem to bring your existing internet connection to every corner of your home.
- Set up in minutes - The eero app walks you through setup in less than 10 minutes and allows you to manage your network from anywhere.
- Don’t let WiFi slow you down - Get the most from your WiFi by streaming, gaming, and working from anywhere in your home.
- Gets better over time - Automatic updates keep your network safe and secure.
- TrueMesh technology - Eero intelligently routes traffic to avoid congestion, buffering, and dropoffs.
- Easily expand your system - With cross-compatible hardware, you can add eero products as your needs change.
Supports T-Mobile Band 71 and AT&T FirstNet Band 14
Quectel EC25-AF is one modem in a series of LTE category 4 modules adopting standard PCI Express® Mini Card form factor (Mini PCI-E). It is optimized specially for M2M and IoT applications, and delivers 150Mbps downlink and 50Mbps uplink data rates.
EC25 Mini PCI-E is available in 11 variants to assure backward-compatible with existing EDGE and GSM/GPRS networks-for remote area applications lacking usable 4G or 3G coverage.
These modems are the EC25-AF North American version with the newest firmware which includes the new T-Mobile Band 71 and AT&T’s FirstNet Band 14.
EC25 Mini PCI-E supports Qualcomm® IZat™ location technology Gen8C Lite (GPS, GLONASS, BeiDou/Compass, Galileo and QZSS). The integrated GNSS greatly simplifies product design, and provides quicker, more accurate and more dependable positioning.
A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB serial drivers for Windows 7/8/8.1/10, Linux, Android/eCall*) extend the applicability of the module to a wide range of M2M applications such as industrial router, industrial PDA, rugged tablet PC, video surveillance and digital signage.
KEY BENEFITS
LTE category 4 module optimized for broadband IoT applications
Worldwide LTE, UMTS/HSPA(+) and GSM/GPRS/EDGE coverage
Standard PCI Express® Mini Card form factor (Mini PCIe) ideal for manufacturers to easily integrate wireless connectivity into their devices
MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
NORTH AMERICA CARRIER CERTIFICATION
North America:
Verizon
AT&T
T-Mobile
U.S. Cellular
Canada:
Rogers
Telus
LTE-FDD BANDS
B2/B4/B5/B12/B13/B14/B66/B71
WCDMA BANDS
B2/B4/B5
DOWNLOAD - UPLOAD DATA
LTE-FDD Data Rates (Mbps): 150 (DL)/ 50 (UL)
DC-HSPA+ Data Rates (Mbps): 42 (DL)/ 5.76 (UL)
WCDMA Data Rates (Kbps): 384 (DL)/ 384 (UL)
Quectel EC25 Mini PCIe LTE Standard Specification.
Quectel EC25 EC21 AT Commands Manual_V1.0
Weight : 1 oz
Dimensions : 3 × 2 × .2 in
M.2 Modem with 2 x Carrier Aggregation
Quectel EM06 is a series of LTE Advanced category 6 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 11 LTE technology, it delivers M2M-optimized speeds of 300Mbps downlink and 50Mbps uplink peak data rates.
Designed in the M.2 form factor, EM06 contains 3 variants (EM06-E, EM06-J, EM06-A) for different target regions and these variants nearly cover all the main stream carriers worldwide. The EM06-A is the variant for North America.
EM06 supports Qualcomm® IZat™ location technology Gen8C Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated GNSS greatly simplifies product design, and provides quicker, more accurate and more dependable positioning capability.
A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB drivers for Windows 7/8/8.1/10, Linux, Android) extend the applicability of the module to a wide range of M2M and IoT applications such as industrial router, home gateway, set top box, industrial laptop, consumer laptop, industrial PDA, rugged tablet PC, video surveillance and digital signage, etc.
NOTE: It is strongly recommended to invest in a quality power strip surge protector (i.e., APC, Belkin,…) to use behind a router and/or electronic equipment. This will help protect against Transients (momentary spikes/surges in voltage or current) that can be detrimental to expensive equipment. Transient damage to modems are not covered under warranty. Protect your equipment.
IMPORTANT: Exercise extreme caution while installing MHF4 connectors to the modem antenna ports. The ports are delicate and easily damaged. Assure that the MHF4 connector is perfectly centered, level and aligned with the modem port. The MFH4 connector will then snap into place using minimum pressure. Do not apply excessive force. A damaged modem connector port is not covered under warranty.
Key Benefits
LTE-A Cat 6 module with M.2 form factor, optimized for M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE-A and UMTS/HSPA+ coverage
Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
Feature refinements: supports DFOTA* and DTMF
MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
Enhanced Features
MIMO: 2 × 2, 4 × 2, DL
Digital Audio and VoLTE (Voice over LTE)
(Optional)
(U)SIM Card Detection
DTMF: Dual-tone Multi-frequency
Support Dual SIM Single Standby*
DFOTA: Delta Firmware over the Air
GNSS: GPS/GLONASS/BeiDou/Galileo/QZSS
Electrical Characteristics
Output Power:
Class 3 (23dBm±2dB) for LTE-FDD
Class 3 (23dBm±2dB) for LTE-TDD
Class 3 (24dBm+1/-3dB) for WCDMA
Consumption
50uA @Power off
4.36mA @Sleep, Typ.
22.3mA @Idle
Software Features
Support eSIM
MBIM Driver:
Windows 10
USB Serial Driver:
Windows 7/8/8.1/10,
Linux 2.6/3.x/4.1~4.15,
Android 4.x/5.x/6.x/7.x/8.x/9.x
RIL Driver:
Android 4.x/5.x/6.x/7.x/8.x/9.x
NDIS Driver
Windows 7/8/8.1/10
Variant for North America
EM06-A
LTE-FDD: B2/B4/B5/B7/B12/B13/B25/B26/B29③/B30/B66
LTE-TDD: B41
2×CA: B2+B2/B5/B12/B13/B29③;
B4+B4/B5/B12/B13/B29③;
B7+B5/B7/B12/B26;
B25+B5/B12/B25/B26;
B30+B5/B12/B29③;
B66+B5/B12/B13/B29③/B66;
B41+B41
WCDMA: B2/B4/B5
Weight : 1 oz
Dimensions : 3 × 2 × .2 in
M.2 Modem with 3 x Carrier Aggregation
Quectel EM12-G is LTE Advanced category 12 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 12 LTE technology, it delivers M2M-optimized speeds of 600Mbps downlink and 150Mbps uplink peak data rates. Designed in the M.2 form factor, EM12 is compatible with Quectel Cat6 module EM06 and future higher category modules which will facilitate customers to migrate between the different categories.
EM12-G is designed for global and nearly covers all the main stream carriers worldwide.
EM12-G supports Qualcomm® IZat™ location technology Gen9HT Lite (GPS, GLONASS, BeiDou, Galileo). The integrated GNSS greatly simplifies product design, and provides quicker, more accurate and more dependable positioning capability.
A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB drivers for Windows 7, Windows 8/8.1, Windows 10, Linux, Android/eCall) extend the applicability of the module to a wide range of M2M and IoT applications such as industrial router, home gateway, STB, industrial laptop, consumer laptop, industrial PDA, rugged tablet PC, video surveillance and digital signage, etc.
NOTE: NOT RECOMMENDED for use with the M2M NEXG H721 due to this router’s high rate of burn out failures. We will warranty NO modems that are used in the M2M NEXG H721 router. It is strongly recommended to invest in a quality power strip surge protector (i.e., APC, Belkin,…) to use behind a router and/or electronic equipment. This will help protect against Transients (momentary spikes/surges in voltage or current) that can be detrimental to expensive equipment. Transient damage to modems are not covered under warranty. Protect your equipment.
IMPORTANT: Exercise extreme caution while installing MHF4 connectors to the modem antenna ports. The ports are delicate and easily damaged. Assure that the MHF4 connector is perfectly centered, level and aligned with the modem port. The MFH4 connector will then snap into place using minimum pressure. Do not apply excessive force. A damaged modem connector port is not covered under warranty.
Key Benefits
LTE-A Cat 12 module with M.2 form factor, optimized for eMBB and IoT applications
Support DL 3x carrier aggregation and 256QAM
Worldwide LTE-A and UMTS/HSPA+ coverage
Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
Feature refinements: supports DFOTA and VoLTE
MIM
Software Features
MBIM Driver: Windows 10
USB Serial Driver: Windows 7/8/8.1/10, Linux 2.6/3.x/4.1-4.14, Android 4.x/5.x/6.x/7.x
RIL Driver: Android 4.x/5.x/6.x
NDIS Driver: Windows 7/8/8.1/10
ECM Driver*: Linux 2.6/3.x/4.1-4.14
Gobinet Driver: Linux 2.6/3.x/4.1-4.14
QMI_WWAN Driver: Linux 3.x (3.4 or later)/4.1-4.14
Protocols
PPP/QMI/NTP*/TCP*/UDP*/FTP*/HTTP*/PING*/HTTPS*/SMTP*/MMS*/FTPS*/SMTPS*/SSL*
General Features
3GPP E-UTRA Release 12
Bandwidth: 1.4/3/5/10/15/20MHz
Supply Voltage: 3.1V~4.4V, 3.7V Typ.
Temperature Range:
Operating temperature Range: -30°C ~ +60°C
Extended Temperature Range: -40°C ~ +85°C
Dimensions: 42.0mm × 30.0mm × 2.3mm
M.2 Package
Approx. TBD
3GPP TS27.007 and Quectel Enhanced AT Commands
LTE-FDD
B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B17, B18, B19, B20, B21, B25, B26, B28, B29, B30, B32, B66
LTE-TDD
B38
39
B40
B41
DL 2×CA
B1+3/5/18/19/20/26;
B2+2/4/5/12/13/17/29/30/66;
B3+3/5/7/8/19/20/28;
B4+4/5/12/13/17/29/30;
B5+7/30/66;
B7+7/20/28;
B12+30;
B13+66;
B19+21;
B20+B32;
B29+30;
B38+38;
B39+39;
B39+39; B39+41
B40+40;
B41+41;
B66+66;12,29,30,5;
B2+B14;B14+B30;B14+B66;
(Note: B29, B32 is only for secondary component carrier)
DL 3×CA
DL inter-band 3CA
B1+3+5/7/8/19/20/28
B1+7+20,
B2+4+5,B2+4+13, B2+5+30, B2+12+30,
B2+29+30 ,B3+7+20, B3+7+28 , B3+7+8,
B4+5+30, B4+12+30, B4+29+30 ,
B5+66+2, B13+66+2,
B66+12+30,B66+29+30,B66+5+30;
B2+B14+B66;
DL 2 intra-band plus inter-band 3CA
B2+2+5, B2+2+13 ,
B3+3+7, B3+7+7, B3+3+20 ,B3+3+28,B3+3+1,
B4+4+5, B4+4+13,
B7+7+28,
B5+66+66, B13+66+66, B66+66+2,
B39+B39+B41; B39+B41+B41;
B14+B66+B66
DL 3 intra-band 3CA
B40+40+40, B41+41+41, B66+66+66
Weight : 1 oz
Dimensions : 3 × 2 × .2 in
M.2 Modem with 4 x MIMO & DL 5 x Carrier Aggregation & 256QAM
Quectel EM160R-GL is an LTE Advanced Category 16 module. Adopting the 3GPP Release 14 technology, it delivers speed of 1.0 Gbps downlink and 150 Mbps uplink peak data rates, and is designed in M.2 form factor.
EM160R-GL is designed for global market and nearly covers all the mainstream carriers worldwide.
EM160R-GL supports Qualcomm® IZat™ location technology Gen8C Lite (GPS, GLONASS, BeiDou and Galileo). The integrated GNSS greatly simplifies product design, and provides quicker, more accurate and more dependable positioning capability.
A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (PCIe interface/USB drivers for Windows, Linux, Android/eCall) extend the applicability of the module to a wide range of applications such as industrial router, home gateway, STB, industrial laptop, consumer laptop, industrial PDA, rugged tablet PC, video surveillance and digital signage, etc.
Key Benefits
LTE-A Cat 16 module with M.2 form factor
Support DL 5x carrier aggregation and 256QAM
Worldwide LTE-A and UMTS/HSPA+ coverage
Support PCIe standard interface for PC/Laptop application
Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
NOTE: The current EM160R-GL modems are new Engineering Samples with the latest Firmware Revision: EM160RGLAUR02A04M4G. Production versions DO NOT exist (As of Nov 2020).
NOT RECOMMENDED for use with the older versions M2M NEXG H721 due to this router’s high rate of burn out failures. We will warranty NO modems that are used in the M2M NEXG H721 router. We have not tested the V5 version.
IMPORTANT: Exercise extreme caution while installing MHF4 connectors to the modem antenna ports. The ports are delicate and easily damaged. Assure that the MHF4 connector is perfectly centered, level and aligned with the modem port. The MFH4 connector will then snap into place using minimum pressure. Do not apply excessive force.
A damaged modem connector port is not covered under warranty.
It is strongly recommended to invest in a quality power strip surge protector (i.e., APC, Belkin,…) to use behind a router and/or electronic equipment. This will help protect against Transients (momentary spikes/surges in voltage or current) that can be detrimental to expensive equipment. Transient damage to modems are not covered under warranty. Protect your equipment!
For Global
EM160R-GL
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/
B17/B18/B19/B20/B25/B26/B28/B29**/B30/
B32**/B66;
LTE-TDD: B38/39/B40/B41/B42/B43/B46*(LAA)/
B48(CBRS)
WCDMA: B1/B2/B3/B5/B6/B8/B19
Support up to DL 5 x CA
LTE DL 4 x 4 MIMO Band
LTE-FDD: B1/B3/B4/B7/B25/B30/B66
LTE-TDD: B38/B39/B40/B41
Data
LTE
LTE-FDD (Max): 1.0 Gbps (DL), 150 Mbps (UL)
LTE- TDD (Max) 880 Mbps (DL), 90 Mbps (UL)
UMTS
DC-HSDPA (Max): 42 Mbps (DL)
HSUPA (Max): 42 Mbps (DL)
WCDMA (Max): 384 Mbps (DL), 384 Mbps (UL)
SMS
Point-to-point MO and MT
SMS Cell Broadcast
Text and PDU Mode
Interfaces
PCIe standard Interface
USB 2.0/3.0, Supports Slave Mode
PCM x 1
(U)SIM Interface x 2: 1.8/3.0 V
ANTCTL x 4
MIPI Interface
W_DISABLE1#: Control Airplane Mode
RESET#: Reset the Module
WAKE_ON_WAN#: Wake up the Host
WWAN_LED#: Indicate Network Status
Main, MIMOx2 , Div & GNSS Antenna Interfaces
Enhanced Features
MIMO: 4 x 4, 2 x 4, 2 x 2 DL
ECall: Emergency Service*
(U)SIM Card Detection
Build-in eSIM
DFOTA: Delta Firmware over the Air
GNSS: GPS/GLONASS/BeiDou/Galileo
Electrical Characteristics
Output Power:
Class 3 (23 dBm + 2dB) for LTE-FDD
Class 3 (23 dBm + 2 dB) for LTE-TDD
Class 3 (24 dBm +1/-3 dB) for WCDMA
Consumption:
TBD @ Power off
TBD @ Sleep, Typ.
TBD @ Idle
Software Features
MBIM Driver: Windows 10
USB Serial Driver:Windows 7/8/8.1/10, Linux
2.6/3x4/4x/5x, Android 4.x/5.x/6.x/7.x/8.x/9.x
RIL Driver: Android 4.x/5.x/6.x/7.x/8.x/9.x
NDIS Driver: Windows 7/8/8.1/10
ECM Driver*: Linux 2.6/3.x/4.x/5.x
Gobinet Driver: Linux 2.6/3.x/4.x/5.x
QMI_WWAN Driver: Linux 3.x (3.4 or later)/
4.x/5.x
Protocols:
PPP/QMI/NTP*/TCP*/UDP*/FTP*/HTTP*/
PING*/HTTPS*/SMTP*/MMS*/FTPS*/SMTPS*/
SSL*
General Features
3GPP E-UTRA Release 14
Bandwidth: 1.4/3/5/10/15/20 MHz
Supply Voltage: 3.1-4.4 V, typ. 3.7 V
M.2 Package
3GPP TS27.007 and Quectel Enhanced AT
Commands
Dimensions: 42.0 mm x 30.0 mm x 2.3 mm
Temperature Range
Operating temperature Range:
-25 to +75 Celsius
Extended Temperature Range:
-40 to +85 Celsius
Approvals
Carrier:
TBD
Regulatory*:
CE/FCC/CCC
GCF/PTCRB
Others*:
WHQL
*under development
TBD: To be Determined
**For Secondary component carrier only
Weight : 1 oz
Dimensions : 3 × 2 × .2 in
WG1608D-M 5G Ready Cellular Gigabit Router With Dual Band (2.4GHz-5.8GHz) WiFi
Gigabit 5G LTE Router with M.2 Key B slot Ready for any M.2 5G or 4G LTE-A modem
WG1608D-M 5G Ready Cellular Gigabit Router with Dual Band (2.4GHz-5.8GHz) WiFi and Dual Modem Slots
The WG1608D-M 5G is customized to include both M.2 (Key B) and Mini PCI-E interface slots for modems–unlike other versions to include our WG1608V2 –to accommodate most all modem form factors without the need of adapters or extra equipment.
LTE FIX has also added metal screw bosses to securely mount a Mini PCI-E modem without the task of removing the router PCBA. Thus, it eliminates having to use the otherwise bulky white plastic spacers and round nuts. A screw and plastic ferrule kit is additionally included in the router package for use when installing a standard sized 4G/LTE M.2 modem.
We also upgraded the 12 volt power supply from a 1 Amp to a 2.5 Amp adapter.
NOTE: The WG1608D-M is only a router which requires a modem for cellular internet. See below for different modem options. While the WG1608D-M 5G is equipped with dual modem slots, only a single M.2 or Mini PCI-E modem may be used at any one time.
NOTE: Cellular service providers may require activating a specific data plan to use on a cellular internet device. The carriers are constantly updating and/or modifying existing cellular plans. It is the customer’s sole responsibility to assure a compatible cellular plan is available prior to purchasing cellular related components. Due to the nature of our products we do not offer refunds or returns on any of our products. We do always offer support and like for like exchange on any product that does not function as the manufacturer intended. Please see our official return policy.
DISCLAIMER: The new mmWave 5G modems have varying power requirements. They are very new to the market and are not widely supported in the US. Check your mmWave 5G modem module design specifications.
OVERVIEW
The WG1608D-M 5G Ready Cellular Router is a Gigabit Gateway Router with Dual Band (2.4GHz-5.8GHz) AC WiFi that is the absolute latest in cellular gateway internet routers.
The WG1608D-M is equipped with the MT7621, a powerful MediaTek processor. The MT7621, MIPS® 1004Kc™, Dual-core, CPU boasts a powerful clock frequency up to 880 MHz.
The new SoC includes proven hardware support for Network Address Translation (NAT), Quality of Service (QoS), SAMBA, Virtual Private Network (VPN) and others routing and tunneling applications. It is ideal for high performance 802.11ac, 5G and 4G LTE-A modems, hotspots, VPN routers, NAS, AC (Access Point Controller) and smart routers. Moreover, the MT7621A applies low-power technology and fits into the WG1608D-M’s design with good power dissipation.
The router is equipped with five (5) Gigabit Auto MDI/MDIX Ethernet ports, one M.2 (NGFF Key B) modem slot (4G/LTE/5G), one Mini PCI-E modem slot, a SIM card tray, a USB 3.0 port, and a Micro SD card slot.
The SIM card tray on the front of the router uses a Standard sized SIM card, and a SIM Card Adapter Kit may be required when using a Nano or Micro sized SIM card (i.e., from a phone or hotspot device).
MODEM OPTIONS
The most popular Sierra Wireless M.2 modems to use with the WG1608D-M are the Sierra Wireless Cat7 EM7411, the Sierra Wireless CAT12 EM7565, and the Sierra Wireless CAT12 EM7511 (which has the AT&T FirstNet Band 14). These are 2×2 MIMO modems and will not use all 4 antennas on the router. Simply tape off the ends of the 2 extra pigtail connectors for later use.
4×4 MIMO 5G Sierra Modems are very very new to the market and will be available in the future.
The most popular Quectel M.2 modems to use the WG1608D-M are the Quectel CAT12 EM12-G (2×2 MIMO) and the Quectel CAT16 EM160R-GL (4×4 MIMO).
Note: The Quectel CAT20 EM20G has been removed from production by Quectel and we are going to take on their new module, the EM160R-GL, as a replacement for it. In tests we have really enjoyed the performance of the EM160R-GL and will be offering it to our customers as soon as it is available in quantity.
The Quectel EM12G, EM20G, EM06-A, EM160R-GL, EM120R-GL, RM500Q, RM510Q, and the Sierra Wireless EM7455 , EM7421, EM7511, EM7411, EM7565, EM9190, EM9191, and EM7690 are all M.2 form factor modems and will fit in the WG1608D-M router. This also includes the SIMCOM SIM8200G, FiboCOM FM150NA, and many others.
The newest 5G modems from all modem manufacturers are using a form factor that is 10mm longer than the 4G LTE modems. The WG1608D-M Router has a screw pillar in place for 5G modems already.
NOTE: If installing a 4G LTE-A M.2 modem into the WG1608V2 you will need to use the factory supplied screw and ferrule hardware in order to secure the module in place.
Check the Modem Installation tab for more information on installing 4G modems into the WG1608V2 and WG1608D-M
CELLULAR ANTENNA UPGRADE OPTIONS
The WG1608D-M stock cellular antennas may be upgraded to any of the following cellular antennas:
700-2700MHz Cradlepoint 3.5dBi 4G LTE Omni Flat Antenna with SMA Male Connector (Requires Four)
698-2700MHz Cradlepoint 3dBi 4G LTE Omni Flat Antenna with SMA Male Connectors (Requires 2 PAIR)
700-2700MHz Rectangular 3.5dBi-4dBi 4G LTE Omni Antenna with SMA Male Connectors (Requires 2 PAIR)
700-2700MHz Rotating 3.5dBi–4dBi 4G LTE Flat Omni Antenna with SMA Male Connectors (Requires 2 PAIR)
700-2700MHz Round 3dBi 4G LTE Omni Antenna with SMA Male Connectors (Requires 2 PAIR)
698-2700MHz Remote 4.5dBi 4G LTE Omni with SMA Male Connectors (Requires Four)
Customers are upgrading many of our routers with the Cisco LTE Omni Antenna Kit. The WG1608D-M is no exception to this benefit.
The Cisco antennas use TNC connectors (as opposed to SMA). The WG1608D-M’s antenna pigtails must be upgraded to match both the modems MHF4 antenna connectors as well as the Cisco antennas TNC connectors. The TNC bulkheads are larger in diameter than the stock SMA bulkhead connectors and so the routers connector holes will need to be modified to be larger.
* Note: The existing SMA connector cutouts in the WG1608D-M router case must be enlarged/drilled to 15/32″ to accommodate the larger TNC bulkhead connectors.
We recommend the following four antenna pigtails when changing from SMA to TNC connectors on your router:
Qty 2: 10″ TNC Female Bulkhead to MHF4 Antenna Pigtails
Qty 2: 8″ TNC Female Bulkhead to MHF4 Antenna Pigtails
The 2×2 MIMO M.2 modems (i.e., EM7455, EM7565, EM12-G) require only one 5″ and one 10″ MHF4 to TNC Female Bulkhead connector pigtail cables.
Alternatively if you would rather use an adapter, we have TNC to SMA Adapters
Adapters can introduce signal losses as you add more and more connection points, so we don’t recommend them unless it is simpler and more feasible for you to install than replacing the pigtails.
SOFTWARE/FIRMWARE OVERVIEW
Original SDK, OpenWRT, eCos, LEDE/ROOter Compatible
Factory Installed version: OpenWRT Chaos Calmer 15.05.1 (mtk-apsoc-demo)
ROOter firmware version build: Rooter WG1608 6/10
DISCLAIMER: LTE FIX is not yet offering a WiFiX firmware build for the WG1608 router. The router comes with the OEM OpenWRT firmware. If additional firmware is required, please locate that firmware prior to making a purchase. Please refer to our official return policy.
INCLUDES
WG1608D-M routers includes:
OpenWRT OEM Firmware
4 x MHF4 to SMA Bulkhead Antenna Connector Pigtails (pre-installed)
2 x Dual Band (2.4Ghz and 5Ghz) WiFi Antennas
4 x 5dbi high-gain 5G Cellular Antennas
12 Volt 2.5 Amp Power Adapter
1 x Screw, Spacer/Nut Ferrule to mount 4G LTE M.2 Key B form factor modems
1 x pillar block (installed) for mounting the longer M.2 Key B form factor 5G modems
2 x pillar block (installed) for mounting mini PCI-E form factor 4G LTE modems
Rack/Wall Mounts and associated screws
Cat5e Ethernet Cable
NOTE: The WG1608D-M is not PoE powered. For outdoor or remote installations in an enclosure, try our 72W 48V Gigabit PoE Injector paired with our 48V to 12V DC PoE Splitter provide power for Power over Ethernet (PoE) applications.
WG1608D-M 5G Tutorials
Complete WG1608D-M Build tutorials Coming Soon!
HARDWARE SPECS
Router Enclosure Size: 240mm x 136mm x 25mm
At a glance:
MTK7621 chipset, 880MHz main frequency
16MB Flash+256MB RAM
Dual band wireless rate, up to 1200Mbps
5 Gigabit ports, 1 WAN port + 4 LAN ports
1 USB 3.0 port + 1 TF / SD card slot +1 SIM Slot/Tray
1 M.2 Slot for 5G cellular modules (4G LTE-A modules will also work with included screw kit)
1 mini PCI-E Slot for 4G LTE cellular modules
Working Environment Specs
Operating Temperature:0℃ ~ 40℃;
Storage Temperature:-40℃~ 70℃;
Operating Humidity:10%~90% non-condensing
Storage Humidity:10%~90% non-condensing
Wireless (Wi-Fi) Overview
Dual band wireless rate, up to 1200Mbps
The WiFi supports IEEE 802.11n/g/b/ac/a protocols with a maximum wireless rate of 1200 Mbps.
It is equipped with Two (2) removable 5dBi high gain Dual Band Wi-Fi antennas for better coverage and performance in large areas.
5.8G WiFi band with MU-MIMO support
2.4G Chipset: MT7603EN
5.8G Chipset: MT7613AEN
Main Chipset: MTK7621 / Dual-core / 880MHz
RAM: DDR3 256MB
FLASH: SPI Flash 16MB
Protocols IEEE 802.11n, IEEE 802.11g, IEEE802.11b, IEEE802.11ac, IEEE802.11a, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Wi-Fi Rate: 5GHz: 900Mbps, 2.4Ghz: 300Mbps
Antennas
2 x 5dBi Dual Band (Wi-Fi) RP-SMA detachable
4 x 5dBi 5G 700-960MHz & 1710-4900MHz SMA detachable
Interfaces
1 x 10/100M/1000M WAN Port, Auto MDI/MDIX
4 x 10/100M/1000M LAN Port, Auto MDI/MDIX
1 x USB 3.0 port
1 x NGFF M.2 Key B slot
1 x mini PCI-E slot
1 x Micro TF / SD card slot
1 x Removable SIM card Tray
LED
PWR, 2.4G, 5.8G, WWAN, External Network
LAN 1/2/3/4, WAN
Button:1 x RESET
Power:DC 12V 2.5A Adapter
Power Consumption: < 20W (without m.2 modem card)
Dimensions(L*W*H) Router: 240MM (9.5”) x 136MM (5.25”) x 25MM (1”) (Does not include antenna bulkheads)
PCB: 190MM x 114MM x 16MM
Management
IP: 192.168.1.1
User Name: admin
Password: admin
Uses: AP, Router, WiFi Hotspot, 5G / LTE Cellular Router
WAN Type:PPPoE, Dynamic IP, Static IP, 3G/4G/LTE / 5G
DHCP: Server, Client, DHCP Client List, Address Reservation
Port Forwarding:Server, Client, DHCP Client List, Address Reservation
Operating System: Original SDK, OpenWRT, eCos, LEDE/ROOter Compatible
Firewall Security
Client filterMAC Address Filter
URL Filter
Long-distance WEB management
DNNS: Supported
Bandwidth Control Supported
Static Router:Supported
System Logging:Supported
Web UI Themes:Supported
Other Functions
Mac cloneNTP Synchronize
Web UI firmware upgrade
Work Environment
Operating Temperature: 0℃ ~ 40℃
Storage Temperature: -40℃~ 70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 10%~90% non-condensing
Certifications: CE, FCC, RoHS
Included Accessories
2 x 5dBi Dual band 2.4Ghz, 5.8Ghz RP-SMA detachable Wi-Fi antennas
4 x 5dBi 700-960MHz & 1710-4900MHz SMA detachable LTE antennas
1 x LAN Cable
1 x Power Adapter 12V 2.5A DC
1 x Screw & Spacers for M.2 4G LTE modem card installation
4 x Screws for 5G Module and/or Brackets
1 x Rack/Wall Mounting Brackets
Dimensions(L*W*H)
Router: 240MM (9.5”) x 133MM (5.25”) x 25MM (1”) (Does not include antenna bulkheads)
PCB: 190MM x 114MM x 16MM
Packaging: 330mm (13.25”) x 230mm (6.5”) x 60mm (2.25”)
Weight
Router: 0.756 KG (1.66 LBS)
Packaged: 1.228 KG (2.701 LBS)
If installing a 4G LTE-A M.2 modem into the WG1608V2 you will need to use the factory supplied screw and ferrule hardware in order to secure the module in place.
This will require the removal of the router board from the metal enclosure for installation, then reinstalling the router board into its metal enclosure.
Weight : 43 oz
Dimensions : 13.5 × 6.5 × 2.25 in
WG3526 4G LTE WiFi Router Dual Band (2.4GHz-5GHz) WiFi Refurb
WG3526 Gigabit 4G LTE Router with Mini PCI-E slot
This router comes installed with the latest version of Rooter Firmware to make customization a little easier.
What's in the box?
2 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed)
2 x 4G LTE Antennas
2 x 2.4GHz Antennas
2 x 5GHz Antennas
12 Volt 2.0 Amp Power Adapter
2 x Screws to mount Mini PCI-E modem or M.2 adapter
Wall mounts, screws and lags
Cat5e Ethernet Cable
SIM Card Adapter to accommodate all SIM sizes.
Hardware Overview
The WG3526 is equipped with the MT7621, the latest MediaTek processor. The MT7621 Wi-Fi SoC Dual-core CPU boasts a powerful clock frequency up to 880 MHz MIPS® 1004KEc™.
The new SoC includes proven hardware support for Network Address Translation (NAT), Quality of Service (QoS), SAMBA, Virtual Private Network (VPN) and others routing and tunneling applications. It is ideal for high performance 802.11ac, LTE CAT3/4/6 modems, hotspots, VPN routers, NAS, AC (Access Point Controller) and smart routers. Moreover, the MT7621A applies low-power technology and fits into the WG3526’s design with good power dissipation.
The router provides for five (5) Gigabit Auto MDI/MDIX Ethernet ports, a Mini PCI-E (mPCIe) slot for modems, a SIM card slot, a USB 3.0 port, a Micro SD card slot, and a SATA 3.0 slot.
Wireless (Wi-Fi) Overview
The WiFi supports IEEE802.11 AC/N/G/B/A protocol with a maximum wireless rate of 1200 Mbps. It is equipped with four (4) removable 5dBi high gain Wi-Fi antennas for better coverage in large areas.
Wifi performance for this unit should be sufficient to provide for a 1500 sq ft house, however some may want to use this router simply as a gateway.
Software Overview
Loaded with the latest version of Rooter
Main Chipset: MT621 / Dual-core / 880MHz
RAM: DDR3 128MB (Expandable to 512MB)
FLASH: SPI Flash 16MB (Max 32MB)
Wi-Fi Protocol: IEEE802.11ac, IEEE802.11a, IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u
Wi-Fi Rate: 5GHz: 900Mbps, 2.4Ghz: 300Mbps
Antennas 4 x 5dBi (Wi-Fi) detachable
Interfaces
1 x 10/100M/1000M WAN Port, Auto MDI/MDIX4 x 10/100M/1000M LAN Port
1 x USB 3.0 port
1 x mini PCIe slot
1 x SD card slot
1 x SIM card slot
1 x SATA 3.0 (not usable with PoE models)
LED
PWR, SYS, USB, 2.4G, 5G, WAN, LAN 3/2/1/0
Button: 1 x RESET
Power: DC 12V 2.0A Adapter, (48V 2.5A PoE Injector WG3526-P only)
Power Consumption: < 12W (without mPCIe modem card)
Dimensions(L*W*H) Router: 165MM (6.5”) x 235MM (9.25”) x 23MM (.91”)PCB:
Management
IP: 192.168.1.1User Name: admin
Password: admin
Uses: AP, Router, Hotspot, LTE Router
WAN Type: PPPoE, Dynamic IP, Static IP, 3G/4G/LTE
DHCP: Server, Client, DHCP Client List, Address Reservation
Port Forwarding: Server, Client, DHCP Client List, Address Reservation
Operating System Original SDK, OpenWRT, eCos, LEDE/ROOter Compatible
Firewall Security
Client filterMAC Address Filter
URL Filter
Long-distance WEB management
DNNS: Supported
Bandwidth Control: Supported
Static Router: Supported
System Logging: Supported
Web UI Themes: Supported
Other Functions
Mac cloneNTP Synchronize
Web firmware upgrade
Work Environment
Operating Temperature: 0℃ ~ 40℃
Storage Temperature: -40℃~ 70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 10%~90% non-condensing
Certifications:CE, FCC, RoHS
Included Accessories
2 x 5dBi 5Ghz SMA detachable Wi-Fi antennas
2 x 5dBi 2.4GHz RP-SMA detachable Wi-Fi antennas
1 x LAN Cable
1 x Power Adapter 12V DC 2.0amp
2 x Screws/Spacers for mini PCI-e modem card installation
SIM Card Adapter
Weight : 46 oz
Packaged: 3.1 LBS
Dimensions : 13 × 9.25 × 2.5 in
Packaging: 13” x 9” x 2.36”
WG3526 with POE - 4G LTE WiFi PoE Router Dual Band (2.4GHz-5GHz)
WG3526P Gigabit 4G LTE Router with Mini PCI-E slot
What's in the box?
2 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed)
2 x 4G LTE Antennas
2 x 2.4GHz Antennas
2 x 5GHz Antennas
12 Volt 2.0 Amp Power Adapter
POE Module on board
2 x Screws to mount Mini PCI-E modem or M.2 adapter
Wall mounts, screws and lags
Cat5e Ethernet Cable
SIM Card Adapter to accommodate all SIM sizes.
Hardware Overview
The WG3526P is equipped with the MT7621, the latest MediaTek processor. The MT7621 Wi-Fi SoC Dual-core CPU boasts a powerful clock frequency up to 880 MHz MIPS® 1004KEc™.
The new SoC includes proven hardware support for Network Address Translation (NAT), Quality of Service (QoS), SAMBA, Virtual Private Network (VPN) and others routing and tunneling applications. It is ideal for high performance 802.11ac, LTE CAT3/4/6 modems, hotspots, VPN routers, NAS, AC (Access Point Controller) and smart routers. Moreover, the MT7621A applies low-power technology and fits into the WG3526’s design with good power dissipation.
The router provides for five (5) Gigabit Auto MDI/MDIX Ethernet ports, a Mini PCI-E (mPCIe) slot for modems, a SIM card slot, a USB 3.0 port, a Micro SD card slot, and a SATA 3.0 slot.
Wireless (Wi-Fi) Overview
The WiFi supports IEEE802.11 AC/N/G/B/A protocol with a maximum wireless rate of 1200 Mbps. It is equipped with four (4) removable 5dBi high gain Wi-Fi antennas for better coverage in large areas.
Wifi performance for this unit should be sufficient to provide for a 1500 sq ft house, however some may want to use this router simply as a gateway.
Software Overview
Loaded with the latest version of Rooter GoldenOrb
Main Chipset: MT621 / Dual-core / 880MHz
RAM: DDR3 128MB (Expandable to 512MB)
FLASH: SPI Flash 16MB (Max 32MB)
Wi-Fi Protocol: IEEE802.11ac, IEEE802.11a, IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u
Wi-Fi Rate: 5GHz: 900Mbps, 2.4Ghz: 300Mbps
Antennas 4 x 5dBi (Wi-Fi) detachable
Interfaces
1 x 10/100M/1000M WAN Port, Auto MDI/MDIX4 x 10/100M/1000M LAN Port
1 x USB 3.0 port
1 x mini PCIe slot
1 x SD card slot
1 x SIM card slot
1 x SATA 3.0 (not usable with PoE models)
LED
PWR, SYS, USB, 2.4G, 5G, WAN, LAN 3/2/1/0
Button: 1 x RESET
Power: DC 12V 2.5A Adapter, (48V 2.5A PoE Injector WG3526-P only)
Power Consumption: < 12W (without mPCIe modem card)
Dimensions(L*W*H) Router: 165MM (6.5”) x 235MM (9.25”) x 23MM (.91”)PCB:
Management
IP: 192.168.1.1User Name: admin
Password: admin
Uses: AP, Router, Hotspot, LTE Router
WAN Type: PPPoE, Dynamic IP, Static IP, 3G/4G/LTE
DHCP: Server, Client, DHCP Client List, Address Reservation
Port Forwarding: Server, Client, DHCP Client List, Address Reservation
Operating System Original SDK, OpenWRT, eCos, LEDE/ROOter Compatible
Firewall Security
Client filterMAC Address Filter
URL Filter
Long-distance WEB management
DNNS: Supported
Bandwidth Control: Supported
Static Router: Supported
System Logging: Supported
Web UI Themes: Supported
Other Functions
Mac cloneNTP Synchronize
Web firmware upgrade
Work Environment
Operating Temperature: 0℃ ~ 40℃
Storage Temperature: -40℃~ 70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 10%~90% non-condensing
Certifications:CE, FCC, RoHS
Included Accessories
2 x 5dBi 5Ghz SMA detachable Wi-Fi antennas
2 x 5dBi 2.4GHz RP-SMA detachable Wi-Fi antennas
1 x LAN Cable
1 x Power Adapter 12V DC
2 x Screws/Spacers for mini PCI-e modem card installation
Weight : 46 oz
Dimensions : 13 × 9.25 × 2.5 in